loader image

Archive for Term: GPS Antennas / Accessories

GPS Antennas / Accessories

The Meinberg GPS antenna system allows distances up to 700m between the time server and the antenna. Unlike other competitors, the receiver is not included in the antenna housing and therefore not exposed to harsh environmental conditions (temperature, humidity). By using our new GPS Optical Antenna Link system (GOAL), you can increase the distance to more than 1000m and avoid electrical problems you would have with standard cabling.

Scope of Delivery: GPS Antenna, 20m of cable and all necessary mounting accessories. Other cable lengths and individual system configurations available on request.

Overview: GPS Antennas / Accessories

The Meinberg GPS antenna system

Showing 1–12 of 13 results

  • ADU/FOS/MP: Fiber-optic GPS antenna splitter for secure signal transmission over long distances 
    Fiber-optic GPS antenna splitter for secure signal transmission over long distances
    ADU is an antenna distribution unit for connecting a Meinberg GPS antenna/converter (GNSS|IF|15V DC) to several Meinberg GPS receivers (up to eight receivers) via single mode fiber lines.
  • AMX21/HS: Antenna Switch Unit for all Meinberg's GPS, GPS/GLONASS L1 and LF Antennas. 
    Antenna Switch Unit for all Meinberg's GPS, GPS/GLONASS L1 and LF Antennas.
    The switching unit AMX21/HS is designed for mounting on a DIN rail. The front panel integrates two switches, three LED indicators and three SMA connectors. The integrated power supply is available as an AC (AMX21DAHS) and a DC variant (AMX21DHS). The antenna/converter units are connected to the switching unit by a 50 Ohm coaxial cable. The output of the switching unit - the chosen antenna signal - is connected to the receiver in the same way. It is possible to connect up to four receivers to one antenna by using an optional antenna diplexer.
  • GNSS MULTI BAND Antenna: Precision Multi Frequency Positioning 
    Precision Multi Frequency Positioning
    The GNSS MULTI BAND Antenna provides multi GPS L1/L2/L5, GLONASS G1/G2/G3, Beidou B1/B2, Galileo E1/E5a+b plus L-band correction services coverage and is especially designed for precision multi frequency positioning. It provides superior multi-path signal rejection, a linear phase response, and tight Phase Centre Variation (PCV).
  • GOAL-S: GPS Optical Antenna Link - Single Mode 
    GPS Optical Antenna Link - Single Mode
    GOAL-S is a GPS Optical Antenna Link - Set for connecting a Meinberg GPS antenna/converter (GNSS | IF | 15 V DC) with a Meinberg GPS receiver via a Single-Mode fiber.
  • GOAL: GPS Optical Antenna Link - Multi Mode
    GPS Optical Antenna Link - Multi Mode
    GPS Optical Antenna Link The Meinberg GPS Optical Antenna Link provides a long-distance connection between a Meinberg GPS antenna and a Meinberg GPS receiver using a GI50/125µm or GI62.5/125µm multimode optical fiber.
  • GPS EX-PROOF: Explosion proof active GPS L1-Antenna
    Explosion proof active GPS L1-Antenna
    Explosion proof active GPS L1-Antenna for areas where hazardous substances may occur.
  • GPS-CON: GPS Converter 
    GPS Converter
    The Meinberg GPS converter allows the connection of a GPS L1 antenna (1575.42MHz) of other vendors to a Meinberg GPS receiver which uses an intermediate frequency.
  • GPSANT: GPS Antenna/Converter Unit 
    GPS Antenna/Converter Unit
    The GPS antenna combines a planar antenna and a frequency converter, which translates the high-frequency phase-modulated spread spectrum signal of the GPS system to an intermediate frequency. This way a standard coaxial cable (e.g. RG58) can be used for the connection with the GPS clock and a distance of up to 300 meters (with RG58) or even 700 meters (with a low-loss cable type like RG213) between receiver and antenna is possible without additional amplifier.
  • GPSAV4: GPS Antenna Distributor (4-port, external)
    GPS Antenna Distributor (4-port, external)
    The GPSAV4 distributes the signal of a Meinberg GPS antenna/converter unit to up to four Meinberg GPS receivers. The direct use or connection of GNSS L1 components is not possible.
  • GPSGEN1575/MP: GPS signal converter/diplexer (4-port)
    GPS signal converter/diplexer (4-port)
    Module for reconverting the Meinberg intermediate frequency to the original GPS frequency.
  • GPSGEN1575: GPS signal converter/diplexer (4-port)
    GPS signal converter/diplexer (4-port)
    Module for reconverting the Meinberg intermediate frequency to the original GPS frequency.
  • MBG S-PRO: Surge Voltage Protector 
    Surge Voltage Protector
    Attachment plug with replaceable gas discharge tube for coaxial signal interfaces Connection: N connector female/female. The MBG S-PRO set includes a surge voltage protector (Phoenix CN-UB-280DC-BB) and a mounting bracket.

Share this page