loader image

Archive for Term: GNSS PCI / PCIe Clocks

GNSS Systems: GPS / GLONASS / Galileo / BeiDou satellite receiver in railmount case or modular 19 inch case

Overview: GNSS PCI / PCIe Clocks

CI Express is the latest implementation of the PCI bus, which is only software-compatible with other PCI bus specifications.

Showing all 3 results

  • GNS181PEX: Low Profile GPS / GLONASS / Galileo / BeiDou Clock (PCI Express)
    Low Profile GPS / GLONASS / Galileo / BeiDou Clock (PCI Express)
    The board GNS181PEX is designed as a low profile board for computers with PCI Express interface. The rear slot cover integrates the SMA antenna connector, a BNC connector for modulated time codes, a 9pin D-SUB male connector and four status LEDs (2mm light pipes). With this standard height bracket you can use the D-SUB connector for I/O signals like RS-232 - PPS and PPM and you can use this interface for firmware updates. The GNS181PEX is delivered including a low profile bracket. You can mount this part instead of the standard bracket, to run the GNS181PEX in computers with smaller housing (e.g. 1U server). The integrated GNSS receiver requires an external antenna. It can be configured to use GPS, Galileo, Beidou and GLONASS. The configuration allows the user to select one of these sources to be used exclusively or a combination with up to three of these sources:
    • GPS
    • GLONASS
    • BeiDou
    • GPS + GLONASS
    • GPS + BeiDou
    • Galileo
    • GPS + Galileo
    • Galileo + GLONASS
    • Galileo + BeiDou
    • GPS + Galileo + GLONASS
    • GPS + Galileo + BeiDou
  • GPS170PCI: GPS Clock for Computers (PCI/PCI-X Bus)
    The Meinberg GPS170PCI slot card is the professional solution to your standalone computer synchronization requirements. Its various outputs like IRIG, serial time string or 1PPS can be used to provide synchronization to other devices. A powerful but easy to use API enables you to integrate a highly accurate time base in your own software and the two independent capture inputs add hardware timestamping of external events to your measurement application.
  • GPS180PEX: Low Profile GPS Clock (PCI Express)
    Low Profile GPS Clock (PCI Express)
    The board GPS180PEX is designed as a low profile board for computers with PCI Express interface. The rear slot cover integrates the antenna connector, a BNC connector for modulated time codes, a 9pin D_SUB male connector and two status LEDs. With this standard height bracket you can use the D_SUB connector for I/O signals like RS-232 - PPS and PPM and you can use this interface for firmware updates. The GPS180PEX is delivered including a low profile bracket. You can mount this part instead of the standard bracket, to run the GPS180PEX in computers with smaller housing (e.g. 1U server).

Share this page