GPSANT: GPS Antenna/Converter Unit 

HomeGPSANT: GPS Antenna/Converter Unit 

GPSANT: GPS Antenna/Converter Unit 

GPS Antenna/Converter Unit

The GPS antenna combines a planar antenna and a frequency converter, which translates the high-frequency phase-modulated spread spectrum signal of the GPS system to an intermediate frequency. This way a standard coaxial cable (e.g. RG58) can be used for the connection with the GPS clock and a distance of up to 300 meters (with RG58) or even 700 meters (with a low-loss cable type like RG213) between receiver and antenna is possible without additional amplifier.

Category:

Description

Product Description

GPS reception can only be reliable if the antenna has a free view of the sky, therefore it needs to be installed at a suitable location, e.g. on a rooftop. The unit is remotely powered by the connected GPS receiver (via the antenna cable) and can be used only with GPS equipment from Meinberg.

Mounting material (plastic pole and holders, clamps for wall or pole mounting) is shipped with all Meinberg GPS antennas for easy installation. A standard cable of 20 meters is included. Please specify your order, if you need a different cable lenght.

Additional information

Key Features

Key Features
Years of warranty: 3 RoHS compliant
Preformed Cable
Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58
Holder for Wall Mounting
Website

https://www.meinbergglobal.com/english/products/gps-antenna-converter.htm

Related products

  • Read more
    GPSGEN1575: GPS signal converter/diplexer (4-port)
    GPS signal converter/diplexer (4-port)
    Module for reconverting the Meinberg intermediate frequency to the original GPS frequency.
  • Read more
    GPSAV4: GPS Antenna Distributor (4-port, external)
    GPS Antenna Distributor (4-port, external)
    The GPSAV4 distributes the signal of a Meinberg GPS antenna/converter unit to up to four Meinberg GPS receivers. The direct use or connection of GNSS L1 components is not possible.
  • Read more
    AMX21/HS: Antenna Switch Unit for all Meinberg's GPS, GPS/GLONASS L1 and LF Antennas. 
    Antenna Switch Unit for all Meinberg's GPS, GPS/GLONASS L1 and LF Antennas.
    The switching unit AMX21/HS is designed for mounting on a DIN rail. The front panel integrates two switches, three LED indicators and three SMA connectors. The integrated power supply is available as an AC (AMX21DAHS) and a DC variant (AMX21DHS). The antenna/converter units are connected to the switching unit by a 50 Ohm coaxial cable. The output of the switching unit - the chosen antenna signal - is connected to the receiver in the same way. It is possible to connect up to four receivers to one antenna by using an optional antenna diplexer.

Share this page