Active RFID & BLE demo KIT FULLY PRE-CONFIGURED CELLULAR / RFID & BLE STARTER KIT FOR RAPID P.O.C.

Active RFID & BLE demo KIT FULLY PRE-CONFIGURED CELLULAR / RFID & BLE STARTER KIT FOR RAPID P.O.C.

LMS RFID & BLE development kit is a combination of sensors, gateway, connectivity and back-end platform to get you started with your RFID development or proof of concept before buying or developing an entire system. Based upon the LMS FOX3 and a set of RFID tags, this active RFID development kit is specifically designed for Real-time Location System. The pre-configured cellular FOX3 with RFID reader communicates with a set of active RFID Tags to capture the presence, identification, temperature, humidity and location of assets, people or vehicles.

Starter-kit RFID tags and sensors:

  • Temperature sensors
  • Humidity sensors
  • Open/closed sensor
  • ID tag x 2

Controller and communications:

  • Pre-configured FOX3-3G and RFID gateway
  • Cellular connectivity (from 1 to 1,024 Mbytes)
  • Online platform for data monitoring and alerts
  • VPN server (optional)
Category:

Description

Overview for Active RFID & BLE KIT

COIN ID – IP68 waterproof active RFID tag

  • Receiving range: up to 80 meters
  • Lifecycle: 2 to 10 years
  • Robust IP68 industrial casing
  • Operating temp.: -30°C to +70°C
  • Size: diameter 36mm – thickness 10mm
  • Specific ID code’s for low level of battery

 

COIN RH – IP68 Internal relative humidity sensor

 

  • Receiving range: up to 80 meters
  • Lifecycle: up to 10 years
  • Measurement range: 0 to 100% RH
  • Accuracy : +/- 3% at 25°C
  • Size: diameter 36mm – thickness 10mm
  • Specific ID code’s for low level of battery

COIN T – IP68 Internal temperature sensor

  • Receiving range: up to 80 meters
  • Lifecycle: up to 10 years
  • Temperature sensor range: -30°C to +70°C
  • Accuracy: +/- 0,5°C over the range – 25°C to +70°C
  • Size: diameter 36mm – thickness 10mm
  • Specific ID code’s for low level of battery

SCIEL READER LITE

  • 433MHz Active RFID reader
  • High range: up to 15m with onboard antenna and up to 80m with external antenna
  • Open collector output (0.1A, 30V) to drive one external relay
  • External Power Supply: 10-26VDC or 5VDC AVL device output
  • RS232 and power supply
  • Automotive μFit connector
  • Operating temperature: -40°C to +70°C

FOX3 CELLULAR GATEWAY

  • Cellular gateway
  • Global 3G connectivity
  • Pre-configured to read RFID tag and report data to D2Sphere
  • Internal or external antenna
  • Multi-constellation GNSS technology

D2SPHERE

 

  • Device and data management platform

Additional information

Website

https://www.lantronix.com/products/active-rfid-kit/

Share this page