The Meinberg GPS converter allows the connection of a GPS L1 antenna (1575.42MHz) of other vendors to a Meinberg GPS receiver which uses an intermediate frequency.
Key Features
Years of warranty: 3 RoHS compliant
Power for active GPS antenna via screw terminal
Easy mounting
Two housing types:
1.) 35mm railmount
2.) Case for wallmount
The GPS antenna combines a planar antenna and a frequency converter, which translates the high-frequency phase-modulated spread spectrum signal of the GPS system to an intermediate frequency. This way a standard coaxial cable (e.g. RG58) can be used for the connection with the GPS clock and a distance of up to 300 meters (with RG58) or even 700 meters (with a low-loss cable type like RG213) between receiver and antenna is possible without additional amplifier.
Antenna Switch Unit for all Meinberg's GPS, GPS/GLONASS L1 and LF Antennas.
The switching unit AMX21/HS is designed for mounting on a DIN rail. The front panel integrates two switches, three LED indicators and three SMA connectors. The integrated power supply is available as an AC (AMX21DAHS) and a DC variant (AMX21DHS).
The antenna/converter units are connected to the switching unit by a 50 Ohm coaxial cable. The output of the switching unit - the chosen antenna signal - is connected to the receiver in the same way. It is possible to connect up to four receivers to one antenna by using an optional antenna diplexer.
Attachment plug with replaceable gas discharge tube for coaxial signal interfaces
Connection: N connector female/female. The MBG S-PRO set includes a surge voltage protector (Phoenix CN-UB-280DC-BB) and a mounting bracket.