GPS EX-PROOF: Explosion proof active GPS L1-Antenna

HomeGPS EX-PROOF: Explosion proof active GPS L1-Antenna

GPS EX-PROOF: Explosion proof active GPS L1-Antenna

Explosion proof active GPS L1-Antenna

Explosion proof active GPS L1-Antenna for areas where hazardous substances may occur.
Category:

Description

Product Description

The Antenna is compliant to the ATEX-Directive 94/9/EC and certificated for Zone 1, an area in which an explosive mixture is likely to occur in normal operation. The ATEX-Directive is an EU directive describing what equipment and work environment is allowed in an area with an explosive atmosphere.

Meinberg’s explosion proof antenna consists of a passive antenna and a stainless steel housing including a 40dB amplifier. The stainless steel (AISI-316) housing which is resistant to many environmental impacts, such as sea salt, makes the antenna also suitable for use on offshore platforms.

Additional information

Key Features

Key Features
Years of warranty: 2 RoHS compliant
Explosion proof according to EN 60079-0: 2009
Pressure resistant housing with integrated 40dB amplifier
Website

https://www.meinbergglobal.com/english/products/explosion-proof-gps-l1-antenna.htm

Related products

  • Read more
    GNSS MULTI BAND Antenna: Precision Multi Frequency Positioning 
    Precision Multi Frequency Positioning
    The GNSS MULTI BAND Antenna provides multi GPS L1/L2/L5, GLONASS G1/G2/G3, Beidou B1/B2, Galileo E1/E5a+b plus L-band correction services coverage and is especially designed for precision multi frequency positioning. It provides superior multi-path signal rejection, a linear phase response, and tight Phase Centre Variation (PCV).
  • Read more
    GPSANT: GPS Antenna/Converter Unit 
    GPS Antenna/Converter Unit
    The GPS antenna combines a planar antenna and a frequency converter, which translates the high-frequency phase-modulated spread spectrum signal of the GPS system to an intermediate frequency. This way a standard coaxial cable (e.g. RG58) can be used for the connection with the GPS clock and a distance of up to 300 meters (with RG58) or even 700 meters (with a low-loss cable type like RG213) between receiver and antenna is possible without additional amplifier.
  • Read more
    GPSAV4: GPS Antenna Distributor (4-port, external)
    GPS Antenna Distributor (4-port, external)
    The GPSAV4 distributes the signal of a Meinberg GPS antenna/converter unit to up to four Meinberg GPS receivers. The direct use or connection of GNSS L1 components is not possible.

Share this page