GPS180PEX

HomeGPS180PEX

GPS180PEX

The board GPS180PEX is designed as a low profile board for computers with PCI Express interface.

Category:

Description

The board GPS180PEX is designed as a low profile board for computers with PCI Express interface. The rear slot cover integrates the antenna connector, a BNC connector for modulated time codes, a 9pin D_SUB male connector and two status LEDs. With this standard height bracket you can use the D_SUB connector for I/O signals like RS-232 – PPS and PPM and you can use this interface for firmware updates.

The GPS180PEX is delivered including a low profile bracket. You can mount this part instead of the standard bracket, to run the GPS180PEX in computers with smaller housing (e.g. 1U server).

Additional information

Key Features

PCI Express Interface
2 time trigger inputs
Programmable Pulse Outputs
Frequency Synthesizer and Time Code Mode
Memory Mapped I/O time reads for high access rates
RS232 interface
IRIG-B/AFNOR time code outputs
Plug and Play
DCF77-simulation
Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58
Configurable time scale (UTC/local, GPS time, TAI)
Driver software for all popular operating systems
Including GPS antenna, 20m standard cable and manual on USB key

Share this page