JetWave 3420 Industrial LTE plus 802.11n WIFI Wireless IP Gateway

JetWave 3420 Industrial LTE plus 802.11n WIFI Wireless IP Gateway

Modular Time- and Frequency Synchronization System for Industrial Applications in DIN Rail Chassis

The full-featured DIN railmount package has one power supply slot, a clock module slot, a CPU slot and two slots for additional input and output modules. Both, wide range AC and a 20-60 V DC power supply model are available.

Description

  • JetWave 3420 Industrial LTE plus 802.11n WIFI Wireless IP Gateway
    • Connect Ethernet, WLAN & Serial device over LTE network
    • Next Generation Long Term Evolution (LTE) technology, 2×2 DL-MIMO, max. 100MDL/50M UL, Backward compatible with 3G UMTS/HSPA+
    • LAN/WIFI to LTE Cellular Routing
    • LTE and Ethernet-WAN Redundant
    • Reliable IEEE 802.11n 2T2R MIMO WIFI coverage
    • Korenix View/NMS for Wire & Wireless Management
    • Supports RS-232/422/485 Serial port
    • Supports NAT/Firewall/DMZ, Secure VPN Connectivity
    • Gigabit PoE+ power input
    • Industrial IP31 Aluminum Housing
    • Redundant DC24V(12~48V) power input, DI + DO Alarm
    • EN50121-4 Railway EMC, -40~70oC Operating temp.
    • JetWave 3420-M12-LTE-E/U: Industrial LTE plus 802.11n 2×2 MIMO Wireless IP Gateway, 2G M12, LTE-E/U Band
    • JetWave 3420-M12-LTE-E/U: Industrial LTE plus 802.11n 2×2 MIMO Wireless IP Gateway, 2G M12, LTE-E/U Band

Additional information

Key Features

Technology
Standard Wireless:
IEEE 802.11a/g/n for Wireless LAN
IEEE 802.11i Wireless Security
Ethernet:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 10/100Base-TX
IEEE 802.3ab for 1000BaseT
IEEE 802.3at for Power over Ethernet
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1Q for VLAN
Highest Data Rate:
IEEE 802.11a, g: 54 Mbps
IEEE 802.11n: 300Mbps @ 40MHz
Interface
Ethernet Port 2x 10/100/1000Base-T RJ-45 (JetWave 3420)
2x 10/100/1000Base-T M12 (JetWave3420-M12)
IEEE 802.3at PoE Complaint in Ethernet Port 1
Power Input 4-pin socket for Dual DC Input
Serial 1x RS-232/422/485, 2-pin DIP for 120ohm long
distance resistor for long distance RS485
Digital Input/
Output
1xDigital Input, 0: +3V max., 1: +11V~+30VDC
1xRelay Output, 1A@24VDC
Console 3-pin Diag. socket for CLI
Reset Reset device or Reset Factory Default (>7 sec.)
Antenna
Socket:
2x SMA Male Reverse for WIFI MIMO
2x SMA Male Reverse for LTE MIMO
Wireless LAN
RF
Modulation
802.11a/n: OFDM (BPSK, QPSK, 16-QAM, 64QAM)
802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM)
Operating
Frequency
5GHz Typical Band: (802.11ac WIFI)
FCC: 5.170~5.250GHz, 5.735~5.835GHz
CE: 5.180~5.240GHz
2.4GHz Band: (802.11n WIFI)
FCC : 2.412~2.462GHz; CE : 2.412~2.472GHz
(Programmable for different country regulations)
Transmission
Rate
802.11b: 11/5.5/2/1.0Mbps
802.11g: 54/48/36/24/18/12/9/6Mbps
802.11a: 54/48/36/24/18/12/9/6Mbps
802.11n: up to 300Mbps (Multiple Rates supported)
Number of
Channel
(Max.)
2.4GHz:
802.11b/g/n(20MHz):13, 802.11n(40MHz): 9
5.18~5.24GHz:
802.11a/ac(20MHz):4, 802.11n(40MHz): 2
*Controllable for different country regulations
WIFI EIRP
Output
Power
(Measured
Max. Average)
5.8GHz Band:
20dB EIRP for ETSI 301 893 (Band 1)
2.4GHz Band:
19dB EIRP for ETSI 300 328
(Included Antenna: 5G 3.57dBi, 2.4G 2.63dBi gain)
*Controllable for different country regulations
Sensitivity 802.11a:
-82dBm@6Mbps,1Rx; -95/-91dBm@6Mbps,2Rx;
-65dBm@54Mbps,1Rx; -79/-75dBm@54Mbps, 2Rx;
802.11g:
-82dBm@6Mbps,1Rx; -95/-91dBm@6Mbps,2Rx;
-65dBm@54Mbps,1Rx; -80/-76dBm@54Mbps,2Rx
802.11a/n HT20:
-82dBm@MCS0,1Rx; -95/-91dBm@MCS8,2Rx;
-64dBm@MCS7,1Rx; -77/-73dBm@MCS15,2Rx
802.11a/n HT40:
-79dBm@MCS0,1Rx; -91/-87dBm@MCS8,2Rx;
-61dBm@MCS7,1Rx;-74/-70dBm@MCS15,2Rx
802.11g/n HT20:
-82dBm@MCS0,1Rx; -95/-91dBm@MCS8,2Rx;
-64dBm@MCS7,1Rx;-77/-73dBm@MCS15,2Rx
802.11g/n HT40:
-79dBm@MCS0,1Rx; -90/-86dBm@MCS8,2Rx;
-61dBm@MCS7,1Rx;-74/-71dBm@MCS15,2Rx
LTE Cellular
Standard 3GPP Release 9 Long Term Evolution (LTE),
2×2 DL-MIMO, max. 100 Mbps DL, 50 Mbps UL
LTE-E Band FDD-LTE – B1/ B3/ B5/ B7/ B8/ B20
TDD-LTE – B38/ B40 /B41
WCDA -B1/ B5/ B8
LTE-A Band FDD-LTE -B1/ B2/ B3/ B4/ B5/ B7/ B8/ B28
TDD-LTE – B40
WCDMA-B1/ B2/ B5/ B8
Power Requirements
Power Ethernet 1: IEEE802.3at PoE+ compliant
Cables: 2/4-pair UTP/STP Cat. 5E cable (100m)
DC Input: Dual 24V (12~48VDC) input
Power
Consumption
Max. 10 Watts @ DC 48V, depend on Radio TX
power
Default WIFI Antenna Characteristics
Gain Default Antenna 5G 3.57dBi, 2.4G 2.63dBi,
Frequency Available for 5G/2.4G band
Direction Omni-Antenna
Material Fiberglass
Management
Management Web GUI, Korenix View Utility, SNMP, IP Setup,
DHCP Server/Client, Management VLAN, NTP,
Configuration Backup/Restore, Reload Default
Operating Mode System: Bridge or Router
Wireless:
Access Point, Client, WDS-AP, WDS-Client
Radio Radio Bandwidth Control, Output power,
Antenna number, Distance in Meter
WLAN Setup Multiple SSID, Radio On/Off, SSID Broadcast,
Frequency/Channel Select, Data Rate, VLAN ID,
Advanced Settings, Client Based Fast Roaming,
Maximum Client number
WMM WMM QoS Traffic Shaping
Incoming/Outgoing Traffic Limit
Router Static, DHCP, LAN/WAN IP, IP/Port Filtering
STP Support Spanning Tree Protocol
SNMP Simple Network Management Protocol
v1/v2c/v3, Function-based MIB
Status Wireless Status, Associated client, Ping, Site
Survey, Ping Watchdog
SNMP Trap SNMP Trap to specific server
SMTP E-mail Alert
System Log System events log
Serial Serial Mode RS-232/422/485 Selection,
Baud Rate, Serial parameters settings,
TCP Server, TCP Client, UDP mode
LTE GUI
LTE SIM Configuration, SIM Security, LTE Connect,
Status, Auto IP report DDNS
Redundant LTE/WAN Redundant
LTE or WAN first

Website

https://www.korenix.com/page/product/show.aspx?num=235&kind=209&page=1

Share this page