JetWave 4020/4020E Industrial Dual Band Dual Radio 802.11ac Wireless AP

JetWave 4020/4020E Industrial Dual Band Dual Radio 802.11ac Wireless AP

Modular Time- and Frequency Synchronization System for Industrial Applications in DIN Rail Chassis

The full-featured DIN railmount package has one power supply slot, a clock module slot, a CPU slot and two slots for additional input and output modules. Both, wide range AC and a 20-60 V DC power supply model are available.



  • JetWave 4020/4020E Industrial Dual Band Dual Radio 802.11ac Wireless AP
    • Industry leading 802.11ac WIFI performance
    • Dual Band Dual Radios, 2.4G 802.11n + 5.8G 802.11ac Wave 1, 3rd Radio by option
    • Up to 1.16Gbps concurrent performance
    • Internal Dual band 9/10dBi 4T4R MIMO Antenna for both Ceiling/Wall-mounting installation
    • N-Type Connector for external antenna (4020E)
    • Dual M12 Gigabit Ethernet Bridging or NAT Routing
    • Controller-based AP management and 100ms Super Roaming, SNMPv1/v2c/v3, Trap, LLDP for NMS
    • WPA/WPA2 Security & VPN/IPSec Connectivity
    • IP67 Water-proof, -40~70℃ operating temperature, EN50121-4 EMC protection
    • M12 24V/110VDC Power Input
    • M12 USB for configuration restoring

Additional information

Key Features

Standard IEEE 802.3 for 10BaseT, IEEE 802.3u for 10/100Base-TX, IEEE 802.3ab for 1000BaseT
IEEE 802.11n/g Wireless LAN
IEEE 802.11ac Wave 1 Wireless LAN
IEEE 802.11i Wireless Security
Highest Data Rate:
2.4G IEEE 802.11n: 300Mbps @ 40MHz
5G IEEE 802.11ac: 866Mbps @ 80MHz
Ethernet Port 1x 10/100/1000Base-T(X) WAN
1x 10/100/1000Base-T(X) LAN
M12 X-code Connector
WIFI IEEE802.11n 2.4G Band, 2T2R MIMO
IEEE802.11ac 5G Band, 2T2R MIMO
USB + Console USB + RS-232 Diagnostic Console, M12 A-code Connector
Power Input 2x 24VDC (±15%) Power Input, M12 A-code Connector
*2x 110V(±15%) by option
Chipset Qualcomm Atheros Processor and 802.11ac WIFI Chipset
Capability 5G IEEE 802.11ac Wave 1 + 2.4G IEEE 802.11n
5G: IEEE 802.11ac 2T2R MIMO, up to 866Mbps PHY Rate, 20-/40-/80-MHz Channels
2.4G: IEEE 802.11n 2T2R MIMO, up to 300Mbps PHY Rate, 20-/40-/80-MHz Channels
Dual Radio Concurrent Design, up to 1.16Gbps PHY Rate
MIMO 5G: IEEE 801.11ac 2T2R MIMO
2.4G: IEEE 801.11n 2T2R MIMO
RF Modulation 802.11ac, 802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM; 256QAM@11ac)
Operating Frequency 5GHz Typical Band: (802.11ac WIFI)
CE: 5.170~5.250GHz, 5.500~5.700GHz, Support Dynamic Frequency Selection (DFS)
FCC: 5.170~5.250GHz, 5.740~5.825GHz
(Programmable for other 5G Band)
2.4GHz Band: (802.11n WIFI)
(Programmable for different country regulations)
RF Output Power 5.8GHz Band:
27dB EIRP for ETSI 301 893 (Band 3)
Certificated for use with up to 10dBi anntenna gain
2.4GHz Band:
20dB EIRP for CE (ETSI 300 328)
Certificated for use with up to 9dBi anntenna gain
(Controllable for different country regulations, check user manual for detail)
RF Sensitivity
(1st Radio, 2.4G Band)
802.11b: -86dBm@11M 1Rx
802.11g: -85dBm@6M 1Rx, -72dBm@54M 1Rx
802.11n HT20: -85dBm@6.5M 1Rx, -68dBm@65M 1Rx
802.11n HT40: -82dBm@13.5M 1Rx, -65dBm@135M 1Rx
(Added 3dBm@2Rx in average, ±2 dBm tolerance)
RF Sensitivity
(2nd Radio, 5G Band)
802.11a: -75dBm@54M 1Rx, -86dBm@6M 1Rx
802.11n/ac HT20: -67dBm@MCS8 1Rx, -90dBm@MCS0 1Rx
802.11n/ac HT40: -64dBm@MCS9 1Rx, -87dBm@MCS0 1Rx
802.11n/ac HT80: -60dBm@MCS9 1Rx, -84dBm@MCS0 1Rx
(Added 3dBm@2Rx in average, ±2 dBm tolerance)
Attached Antenna Embedded Wall/Ceiling-mount 180∘2.4G 2T2R + 5G 2T2R bands antenna with a reflector plate.
Radio Pattern 1/2: 2400-2500MHz Frequency, 9dBi peak gain
Radio Pattern 3/4: 5150-5350MHz: 10dBi peak gain, 5475-5874MHz: 8dBi peak gain
VSWR: 2.5:1
Range from 150m ~300m depends on the location, check the manual for detail.
Transmission Rate 802.11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
802.11b: 1,2,5.5,11Mbps
802.11n: 6.5 to 300Mbps (Multiple Rates, depends on MCS Index and Ground Interval)
802.11ac: 6.5 to 866Mbps (Multiple Rates, depends on MCS Index and Ground Interval)


Share this page