GPS180: GPS Satellite Receiver with LC-Display and Control Elements (Eurocard)

GPS180: GPS Satellite Receiver with LC-Display and Control Elements (Eurocard)

The variety of inputs/outputs makes this GPS receiver the first choice for a broad range of applications, including time and frequency synchronization tasks and the measurement of asynchronous time events.


Product Description

The frequency locking of the master oscillator to the GPS system enables the module GPS180 to generate fixed and programmable standard frequencies with very high accuracy and stability. Various oscillator options allow to meet different requirements concerning the accurracy of the outputs in the most cost efficient way.

The pulse generator of GPS180 generates pulses per second and per minute. Four programmable outputs are available. The pulses are synchronized to UTC second.

Up to four serial interfaces are available for sending time strings. These ASCII telegrams include information regarding time, date and status of the GPS receiver.

The module provides two inputs for measurement of asynchronous time events. These capture events are shown on the LC-Display and can be read via a serial interface.

The front panel integrates a LC-Display that shows information regarding the GPS receiver in different menus. In combination with four push buttons it is also used to setup all configurable parameters.

Additional information

Key Features

Key Features
Years of warranty: 3 RoHS compliant
Pulses per second and per minute
2 time trigger inputs
2 RS232 interfaces
Alarm output
DDS frequency synthesizer
Meinberg GPS Antenna/Converter Unit connected with up to 300m of standard coaxial cable RG58
DC-insulated antenna circuit
Standard frequency outputs
Flash-EPROM with bootstrap loader
Optional up to 4 serial ports
4 programmable switching outputs
timecode generator (IRIG-B, AFNOR)
5 MHz Frequency Output
Including GPS antenna, 20m standard cable and manual on USB key


Share this page