JetWave 2316-LTE Series Industrial Cellular + WIFI + Gigabit Switch IP Gateway

JetWave 2316-LTE Series Industrial Cellular + WIFI + Gigabit Switch IP Gateway

Modular Time- and Frequency Synchronization System for Industrial Applications in DIN Rail Chassis

The full-featured DIN railmount package has one power supply slot, a clock module slot, a CPU slot and two slots for additional input and output modules. Both, wide range AC and a 20-60 V DC power supply model are available.



  • JetWave 2316-LTE Series Industrial Cellular + WIFI + Gigabit Switch IP Gateway
    • Long Term Evolution (LTE) technology, 2×2 DL-MIMO, max. 100MDL/50M UL
    • 1GT WAN, support Static Route and RIP protocol
    • 6-port Gigabit Switch, 4GT + 2×100/1000Base-X SFP, Wire-speed Switching, LAN to WAN/LTE Routing
    • Rapid Super Ring Redundancy protocol, can be integrated with Korenix Managed Switch
    • Support 256 VLAN tagging and QoS
    • 802.11n 2.4G, up to 300Mbps WLAN, WIFI Auto-offload
    • WAN to Cellular and Dual SIM Redundancy
    • NAT/Firewall/DMZ and Secure VPN Connectivity
    • OPCuA for Industrial M2M Communication
    • Korenix View, Mobile Manager, SNMP, Korenix NMS
    • 1xRS232/422/485 Serial communication
    • USB Configuration/Firmware restoring
    • Dual DC 24V(12-48V), -40~70℃ operating temperature

Additional information

Key Features

Standard IEEE 802.3 for 10BaseT, IEEE 802.3u for 10/100Base-TX,
IEEE 802.3ab for 1000BaseT, IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.11n/g Wireless LAN
IEEE 802.11i Wireless Security
3GPP Release 6,7,8 3G UMTS/HSDPA/HSUPA
3GPP Release 9 Long Term Evolution (LTE)
IEEE802.1p Class of Service
Ethernet Port – WAN 1x 100/1000Base-T(X) RJ-45
Ethernet Port – LAN 4x 100/1000Base-T(X) RJ-45 + 2x 1000Base-X/100Base-FX SFP Socket
Switching: Store and Forward or Cut-Throughput
Non-blocking Switching Performance, 12Gbps for 6 front ports, 1Mbit on-chip memory.
Throughput: 14,880pps for 10M, 148,800pps for 100M, 1,488,100pps for Gigabit Ethernet Port
Packet Size: Typical 64~1522 bytes and up to 10K Jumbo frame
MAC Table: 8K MAC Address table with automatic learning and aging
Serial COM 1x Software selectable RS-232/422/485
Cellular Long Term Evolution (LTE, cat. 3)
WIFI IEEE802.11n 2.4G Band, 2T2R MIMO
SIM Socket 2 (Dual SIM Standby)
Power Input 2x 24VDC (12~48VDC) input
Relay Output 1xRelay Output, 1A@24VDC
Reset Reset Switch, Reset to Default over 7 seconds
LED System: PWR, Radio 1, Radio 2, DO, WAN, COM
Ethernet Copper Port Link/Speed LED, Ethernet Fiber Link/Act LED
SMA Antenna Socket 4 sockets available, 2x LTE, 2x WIFI
A: LTE-AUX, B: 802.11n-Main, C: LTE-Main, D: 802.11n-Aux
CPU Qualcomm Atheros 700MHz
Operating Frequency FCC : 2.412~2.462GHz
CE : 2.412~2.472GHz (Programmable for different country regulations)
RF Modulation 802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM)
RF Output Power 13dBm at 802.11g, 11dBm at 802.11n HT40 (MCS0/8, 2422MHz)
<17dB EIRP for CE (ETSI 300 328, include 4dBi default antenna)
RF Sensitivity 802.11g: -82dBm@6Mbps,1Rx; -65dBm@54Mbps,1Rx
802.11n HT20: -82dBm@MCS0,1Rx; -64dBm@MCS7,1Rx
802.11n HT40: -79dBm@MCS0,1Rx; -61dBm@MCS7,1Rx
Attached Antenna LTE: 791-960Mhz:1 dbi/1710-1880Mhz: 3dBi/1920-2170Mhz:2.5dBi/2500-2700Mhz:3.5dBi peak
gain, -40~85℃ temperature, RP SMA Plug, Black Color
802.11n: 2.4GHz, omin-direction 4dBi gain, -40~85℃ temperature, RP SMA Plug, White Color
Cellular LTE
LTE Standard 3GPP Release 9 Long Term Evolution (LTE), 2×2 DL-MIMO
LTE category 3: max. 100 Mbps DL, 50 Mbps UL
Backward compatible with HSPA:
UMTS/HSPA+: Five band 800/850/900/1900/2100MHz
GSM/GPRS/EDGE: Quad band 850/900/1800/1900MHz
LTE-E Band
LTE: 800/900/1800/2600/2100 MHz, FDD-Band (20,8,3,7, 1)
UMTS/HSPA+: 900/1800/2100 MHz, FDD-Band (8,3,1)
GSM/GPRS/EDGE: 900/1800 MHz
LTE-U Band
LTE: 700/850/AWS(1700/2100)/1900 MHz, FDD-Band (17,5,4,2)
UMTS/HSPA+: 850/AWS(1700/2100)/1900 MHz, FDD-Band (5,4,2)
GSM/GRPS/EDGE: 850/900/1800/1900 MHz


Share this page