JetWave 3320 Industrial UMTS/HSPA+ plus 802.11n 2T2R MIMO Wireless IP Gateway

JetWave 3320 Industrial UMTS/HSPA+ plus 802.11n 2T2R MIMO Wireless IP Gateway

Modular Time- and Frequency Synchronization System for Industrial Applications in DIN Rail Chassis

The full-featured DIN railmount package has one power supply slot, a clock module slot, a CPU slot and two slots for additional input and output modules. Both, wide range AC and a 20-60 V DC power supply model are available.

Description

  • JetWave 3320 Industrial UMTS/HSPA+ plus 802.11n 2T2R MIMO Wireless IP Gateway
    • Connect Ethernet, WLAN & Serial device over 3G network
    • UMTS/HSPA+ bands, GSM/GPRS/EDGE quad-band support
    • 802.11n 2×2 MIMO doubles data rate, 300Mbps
    • Dual Gigabit Ethernet Ports
    • LAN to 3G Routing, WIFI to 3G Routing
    • 3G/WAN Redundant
    • JetView for Wire & Wireless Management
    • RS-232/422/485 Serial port supports Serial mode includes TCP Server/Client and UDP
    • Gigabit PoE power input
    • Industrial IP31 Aluminum Housing
    • Redundant DC24V(12~48V) power input, DI + DO Alarm
    • EN50121-4 Railway EMC, -40~70oC Operating temp.
    • JetWave 3320: Industrial UMTS/HSPA+ plus 802.11n 2T2R MIMO Wireless IP Gateway
    • JetWave 3320-M12: Industrial UMTS/HSPA+ plus 802.11n 2T2R MIMO Wireless IP Gateway with Dual Gigabit Ethernet M12 Connector

Additional information

Key Features

Technology
Standard Wireless:
IEEE 802.11a/g/n for Wireless LAN
IEEE 802.11i Wireless Security
Ethernet:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 10/100Base-TX
IEEE 802.3ab for 1000BaseT
IEEE 802.3at for Power over Ethernet
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1Q for VLAN
Highest Data Rate:
IEEE 802.11a, g: 54 Mbps
IEEE 802.11n: 300Mbps @ 40MHz
Interface
Ethernet Port 2x 10/100/1000Base-T RJ-45 (JetWave 3320)
2x 10/100/1000Base-T M12 (JetWave 3320-M12)
IEEE 802.3at PoE Complaint in Ethernet Port 1
Power Input 4-pin socket for Dual DC Input
Serial 1x RS-232/422/485, 2-pin DIP for 120ohm long
distance resistor for long distance RS485
Digital Input/
Output
1xDigital Input, 0: +3V max., 1: +11V~+30VDC
1xRelay Output, 1A@24VDC
Console 3-pin Diag. socket for engineer
Reset Reset Factory Default after press 7 seconds
Antenna
Socket:
SMA type for 3G/GPRS, WIFI
Performance
CPU 680MHz
Memory 16MB Flash
64MB SDRAM
Operating
Frequency
5GHz Typical Band: (802.11n WIFI)
FCC: 5.170~5.250GHz, 5.735~5.835GHz
CE: 5.170~5.250GHz
(Programmable for other 5G Band)
2.4GHz Band: (802.11n WIFI)
FCC : 2.412~2.462GHz
CE : 2.412~2.472GHz
(Programmable for different country regulations)
RF
Modulation
802.11a/n: OFDM (BPSK, QPSK, 16-QAM, 64QAM)
802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM)
RF Output
Power (Max.
of Avg.)
5.8GHz Band:
21dBm@ 802.11a/n HT20 (MCS0/8, 5180MHz) for
FCC
23dB EIRP for ETSI 301 893 (Band 1)
25dB EIRP for ETSI 301 893 (Band 4)
2.4GHz Band:
21dBm at 802.11g/n HT40 (MCS0/8, 2422MHz) for
FCC
20dB EIRP for CE (ETSI 300 328)
(Controllable for different country regulations)
Sensitivity 802.11a:
-82dBm@6Mbps,1Rx; -95/-91dBm@6Mbps,2Rx;
-65dBm@54Mbps,1Rx; -79/-75dBm@54Mbps, 2Rx;
802.11g:
-82dBm@6Mbps,1Rx; -95/-91dBm@6Mbps,2Rx;
-65dBm@54Mbps,1Rx; -80/-76dBm@54Mbps,2Rx
802.11a/n HT20:
-82dBm@MCS0,1Rx; -95/-91dBm@MCS8,2Rx;
-64dBm@MCS7,1Rx; -77/-73dBm@MCS15,2Rx
802.11a/n HT40:
-79dBm@MCS0,1Rx; -91/-87dBm@MCS8,2Rx;
-61dBm@MCS7,1Rx;-74/-70dBm@MCS15,2Rx
802.11g/n HT20:
-82dBm@MCS0,1Rx; -95/-91dBm@MCS8,2Rx;
-64dBm@MCS7,1Rx;-77/-73dBm@MCS15,2Rx
802.11g/n HT40:
-79dBm@MCS0,1Rx; -90/-86dBm@MCS8,2Rx;
-61dBm@MCS7,1Rx;-74/-71dBm@MCS15,2Rx
3G Cellular
Frequency
Bands
GSM/GPRS/EDGE:
Quad band, 850/900/1800/1900MHz
UMTS/HSPA+: Five band,
800/850/900/1900/2100MHz
HSPA Standard: 3GPP Release 6/7
Data Rate: DL 14.4Mbps, UL 5.7Mbps
UMTS Standard: 3GPP Release 4
Data Rate: PS 384kbps DL/ 384kbps UL
*Check User manual for detail specification
Power Requirements
Power Ethernet 1: IEEE802.3at PoE+ compliant
Cables: 2/4-pair UTP/STP Cat. 5E cable (100m)
DC Input: Dual 24V (12~48VDC) input
Power
Consumption
Max. 10 Watts @ DC 48V, depend on Radio TX
power
Default WIFI Antenna Characteristics
Gain Default Antenna 5G 3.57dBi, 2.4G 2.63dBi,
Frequency Available for 5G/2.4G band
Direction Omni-Antenna
Material Fiberglass
Management
Management Web GUI, Korenix View Utility, SNMP, IP Setup,
DHCP Server/Client, Management VLAN, NTP,
Configuration Backup/Restore, Reload Default
Operating Mode System: Bridge or Router
Wireless:
Access Point, Client, WDS-AP, WDS-Client
Radio Radio Bandwidth Control, Output power,
Antenna number, Distance in Meter
WLAN Setup Multiple SSID, Radio On/Off, SSID Broadcast,
Frequency/Channel Select, Data Rate, VLAN ID,
Advanced Settings, Client Based Fast Roaming,
Maximum Client number
Link Integration Wire and Wireless Link Fault Pass-Through
WMM WMM QoS Traffic
Shaping Incoming/Outgoing Traffic Limit
Router Static, DHCP, LAN/WAN IP, IP/Port Filtering
STP Support Spanning Tree Protocol
SNMP Simple Network Management Protocol
v1/v2c/v3, Function-based MIB
Status Wireless Status, Associated client, Ping, Site
Survey, Ping Watchdog
Link Test Antenna Alignment Tool
Data Rate Test
SNMP Trap SNMP Trap to specific server
SMTP E-mail Alert
System Log System events log
Serial Serial Mode RS-232/422/485 Selection,
Baud Rate, Serial parameters settings,
TCP Server, TCP Client, UDP mode
3G
3G 3G Connect, 3G Status, Debug log download
SIM Security, Auto IP report
Redundant 3G/WAN Redundant
GPS GPS Positioning(Phase 2)

Website

https://www.korenix.com/page/product/show.aspx?num=234&kind=209&page=1

Share this page